Model RD Double Deflection Isolators, Neoprene/Elastomeric Floor Mounted Non-Seismic
The RD Series are elastomeric flush-type isolators that provide effective vibration control for use directly under HVAC, power generation and electrical equipment in conjunction with the equipment’s mounting holes.
The RD Series have ribbed, non-skid bases and may be installed with or without bolting the isolators to the equipment. No bolting is required under equipment that has no lateral or severe vertical motion. The RDP version offers an isolator with a pin for inaccessible bolt holes.
The RD Series isolators are embedded in colored elastomer. This color-coding system permits instant identification of loading capacities, and prevents installation errors. The RD Series offer deflections to 0.50″. Four different sizes offer a load capacity range of 10 to 4,000 lbs. per isolator – offering isolators that may be accurately selected for the equipment weight.
Benefits
Static load range of 35 4,000 lbs. offers solutions for a wide range of equipment weights
0.50 Load deflection provides accurate selection of isolators based on equipment requirements
Tapped bolt holes permit more secure installation if required
Ribbed isolator base provides a non-skid surface-eliminating the need to bolt machinery to the isolators
Elastomer-coated isolators are color-coded for easy identification
Contact The VMC Group for other engineered elastomeric compounds
Weather-resistant Durulene elastomer
Applications
Air handling units
Fans
Pumps
Chillers
Air compressors
HVAC equipment
Power generation
Electrical transformers
