CALL TOLL FREE
CALL: 1-800-314-3332

Model HSA-PR Pre-Compressed Spring Angularity Hangers, Ceiling Suspended Mounted Non-Seismic

SKU: HSA-PR-Pre-Compressed-Spring-Angularity-Hangers Category:

* Request quote to see pricing

Request Quote

HSA-PR Series Pre-compressed Spring Angularity Hangers are designed to isolate low frequency vibrations in suspended piping and equipment – preventing transmission of vibration to the building structure through the piping systems. The products incorporate a color-coded steel spring for ease of identification in the field. Load ranges from 21 – 8,200 lbs. and up to deflections of 3″. Custom sizes and deflections up to 5″ available upon request.

The VMC Group HSA-PR Pre-compressed Spring Angularity Hangers combine both a pre-compressed feature along with 30°of angularity for misalignment of hanger rods. The pre-compressed designs are pre-compressed to the rated deflection so as to support the suspended equipment or piping at a fixed elevation during installation regardless of load changes. The angularity hangers have a 30° misalignment capability, spring diameters and hanger box lower hole sizes are sufficiently sized to permit the hanger rod to swing approximately 30° before contacting the box.

The HSA-PR Pre-compressed Series also offers the capability to incorporate eyebolt hardware to accommodate duct strap connections and/or pencil rods, when isolating ductwork and suspended ceilings.

Features & Benefits
Loads from 21 – 8,200 lbs. with static deflections up to 3” provide flexibility over a wide range of applications
Pre-compressed hangers offer quick and easy installation in even the most challenging locations
Lower hanger rod enables a 30⁰ swing to compensate for rod misalignment and prevents short circuits to the hanger box
Color-coded springs provide easy identification of spring hangers for installation and inspection

Applications
Suspended piping
Suspended electrical services
Suspended equipment
Suspended ductwork

Model HSA-1B 20-85 lbs. Pre compressed spring angularity hangers 1 inch deflection

Model HSA-1C 50-370 lbs. Pre compressed spring angularity hangers 1 inch deflection

Model HSA-1E 195-2000 lbs. Pre compressed spring angularity hangers 1 inch deflection

Model HSA-1G 3600 lbs. Pre compressed spring angularity hangers 1 inch deflection

Model HSA-2D 75-845 lbs. Pre compressed spring angularity hangers 2 inch deflection

Model HSA-2E 80-2050 lbs. Pre-Compressed Spring Angularity Hangers 2 inch deflection

Model HSA-3C 75-600 lbs. Pre compressed spring angularity hangers 3 inch deflection

Copyright© 2022 Isotech, Inc. All rights reserved.