| Anti-Stiction Air Cylinder - Specifications |
|
Click on a model to view its data sheet.
| MODEL | E9 | E16 | E24 |
| BORE (inches) | 0.366 | 0.627 | 0.945 |
| PISTON AREA (sq. inch) | 0.105 | 0.307 | 0.701 |
| PRESSURE RANGE: FULL VACUUM TO - (PSI) | 100 | 100 | 100 |
| FORCE OUTPUT AT MAX PRESSURE ON REAR SIDE (lbs) | 10.5 | 30.70 | 70.1 |
| FORCE OUTPUT AT MAX PRESSURE ON ROD SIDE (lbs) | 9.3 | 27.60 | 65.2 |
| FORCE FACTOR REAR SIDE (factor x pressure=force output) |
0.105 | 0.307 | 0.701 |
| FORCE FACTOR ROD SIDE (factor x pressure=force output) |
0.093 | 0.276 | 0.652 |
| MIN PRESSURE DIFFERENTIAL REQD FOR ACTUATION (PSI) | <0.2 | <0.2 | <0.2 |
| PISTON FRICTION AS % OF LOAD (without side load) |
1%-2% | 1%-2% | 1%-2% |
| OPERATING TEMPERATURE RANGE | -55° C to +150° C | -55° C to +150° C | -55° C to +150° C |
| WEIGHT OF PISTON/ROD ASSY ONLY (grams) |
|||
| Single rod end models Double rod end models |
4.5+(1.36 x STROKE) 9.93+(3.24 x STROKE) |
16+(3.6 x STROKE) 29.08+(8.00 x STROKE) |
40.64+(6.46 x STROKE) 73.28+(12.92 x STROKE) |
| WEIGHT OF COMPLETE UNIT (grams) | |||
| Single rod end models Double rod end models |
31.7+(9.52 x STROKE) 38.46+(11.74 x STROKE) |
64.6+(15.8 x STROKE) 84.49+(21.68 x STROKE) |
156.42+(31.12 x STROKE) 203.9+(37.58 x STROKE) |
| MAX LEAK AT REFERENCE PRESSURES | |||
| AT PRESSURE PSI= | 50 | 50 | 50 |
| MAX LEAK RATE by Piston: SL / min | 1.16 | 1.39 | 2.2 |
| MAX LEAK RATE by Rod: SL / min | 2.2 | 2.6 | 2.6 |
*NOTE: Lower leak rates are available upon request.
| MODEL | M9 | M16 | M24 | M32 |
| BORE (mm) | 9.3 | 15.9 | 24.0 | 32.5 |
| PISTON AREA (sq. mm) | 67.7 | 198 | 452.5 | 830 |
| MAX PRESSURE: (MPa) | 0.7 | 0.7 | 0.7 | 0.7 |
| SUITABLE FOR VACUUM ACTUATION? | Yes | Yes | Yes | No |
| FORCE OUTPUT AT MAX PRESSURE ON REAR SIDE (Newtons) | 47.4 | 139 | 316.6 | 581 |
| FORCE OUTPUT AT MAX PRESSURE ON ROD SIDE (Newtons) | 42.0 | 125 | 294.5 | 526 |
| Force factor Rear Side (factor x pressure(MPa)= force output (N)) |
67.7 | 198 | 452.5 | 830 |
| Force factor Rod Side (factor x pressure(MPa)= force output (N)) |
60.0 | 178 | 420.8 | 751 |
| MIN PRESSURE DIFFERENTIAL REQD FOR ACTUATION (MPa) | < 0.0015 | < 0.0015 | < 0.0015 | < 0.0035 |
| PISTON FRICTION (without side load) AS % OF LOAD |
1%-2% | 1%-2% | 1%-2% | 1%-2% |
| OPERATING TEMPERATURE RANGE | -55° C to +150° C | -55° C to +150° C | -55° C to +150° C | -55° C to +150° C |
| WEIGHT OF PISTON/ROD ASSY (grams) |
||||
| Single rod end models Double rod end models |
4.5+(0.053 x STROKE) 8.87+(0.13 x STROKE) |
16+(0.142 x STROKE) 28.48+(0.315 x STROKE) |
41.4+(0.254 x STROKE) 74.28+(.509 x STROKE) |
82.6+(0.56 x STROKE) |
| WEIGHT OF COMPLETE UNIT (grams) | ||||
| Single rod end models Double rod end models |
31.7+(0.375 x STROKE) 41.02+(0.462x STROKE) |
64.6+(0.622 x STROKE) 80.45+(0.854 x STROKE) |
157.18+(1.225 x STROKE) 204.9+(1.480 x STROKE) |
616+(3.66 x STROKE) |
| MAX LEAK AT REFERENCE PRESSURES | ||||
| AT PRESSURE MPa= | 0.34 | 0.34 | 0.34 | 0.34 |
| MAX LEAK RATE by Piston: SL / min | 1.16 | 1.39 | 2.2 | 2.2 |
| MAX LEAK RATE by Rod: SL / min | 2.2 | 2.6 | 2.6 | 2.0 |
*NOTE: Lower leak rates are available upon request.
| Isotech,
Inc. 777 Schwab Road, Suite T Hatfield, PA 19440 |
|