|
Ball Slide Positioning Stages - Specifications |
 
|
Click Here For Dimensional Drawings of the Ball Slide Positioning Stages
 |
 |
| WORK SURFACE |
OVERALL DIMENSIONS |
LOAD CAPACITY, LB. |
THROUGH HOLE |
||||
| MODEL | TRAVEL | A x B | L | Hx | X, XY | Z | |
| 99 | .25 | .75 x .75 | 2.28 | .53 |
5 | 1.25 | NO |
| 101 | .50 | 1.25 x 1.25 | 3.25 | .38 |
4 | 1.25 | NO |
| 201 | .50 | 1.75 x 1.75 | 3.75 | .38 |
4 | 1.25 | NO |
| 301 | .50 | 1.50 x 1.50 | 3.50 | .62 |
12 | 2 | .312 DIA. |
| 450 | .50 (13 mm) | 1.75 x 1.75 | 4.38 | .75 | 20 | 2 | NO |
| 451 | 1.00 (25 mm) | 1.75 x 1.75 | 5.88 | .75 |
20 | 2 | NO |
| 453 | .50 (13 mm) | 1.75 x 1.75 | 4.38 | .75 |
20 | 2 | .50 DIA. |
| 750 | .50 (13 mm) | 2.62 x 2.62 | 5.25 | 1.00 |
60 | 2 | NO |
| 751 | 1.00 (25 mm) | 2.62 x 2.62 | 6.75 | 1.00 |
60 | 2 | NO |
| 753 | .50 (13 mm) | 2.62 x 2.62 | 5.25 | 1.00 |
60 | 2 | 1.00 DIA. |
| 401 | .50 (13 mm) | 2.00 x 1.75 | 4.62 | .75 |
20 | 20 | NO |
| 501 | .50 (13 mm) | 3.25 x 1.75 | 5.86 | .75 | 42 | 20 | NO |
| 502 | 1.00 (25 mm) | 3.25 x 1.75 | 7.41 | .75 |
42 | 20 | NO |
| 701 | .50 (13 mm) | 4.00 x 2.62 | 6.62 | 1.00 |
60 | 20 | NO |
| 702 | 1.00 (25 mm) | 4.00 x 2.62 | 8.25 | 1.00 |
60 | 20 | NO |
| 1201 | 1.00 (25 mm) | 3.12 x 3.12 | 7.25 | .91 |
30 | 30 | NO |
| 1203 | 1.00 (25 mm) | 3.12 x 3.12 | 7.25 | .91 |
30 | 30 | 1.00 DIA. |
| 2201 | 1.00 (25 mm) | 4.12 x 4.12 | 8.38 | .91 |
30 | 30 | NO |
| 2202 | 2.00 | 4.12 x 4.12 | 10.25 | .91 |
30 | 30 | NO |
| 2203 | 1.00 (25 mm) | 4.12 x 4.12 | 8.38 | .91 |
30 | 30 | 1.50 DIA. |
| 2204 | 2.00 | 4.12 x 4.12 | 10.25 | .91 |
30 | 30 | 1.50 DIA. |
| 3201 | 1.00 (25 mm) | 5.12 x 5.12 | 9.28 | .91 |
30 | 30 | NO |
| 3202 | 2.00 | 5.12 x 5.12 | 11.25 | .91 |
30 | 30 | NO |
| 3203 | 1.00 (25 mm) | 5.12 x 5.12 | 9.28 | .91 |
30 | 30 | 2.00 DIA. |
| 3204 | 2.00 | 5.12 x 5.12 | 11.25 | .91 |
30 | 30 | 2.00 DIA. |
| PLAIN MODELS (WITHOUT MICROMETER, BRACKETS OR SPRINGS). X AND XY CONFIGURATIONS ONLY | |||||||
| 101P | .50 | 1.25 x 1.25 | -- | .38 |
4 | -- | NO |
| 201P | .50 | 1.75 x 1.75 | -- | .38 |
4 | -- | NO |
| 301P | .50 | 1.50 x 1.50 | -- | .62 |
12 | -- | .312 DIA |
| 451P | 1.00 | 1.75 x 1.75 | -- | .75 |
20 | -- | NO |
| 452P | 1.00 | 1.75 x 1.75 | -- | .75 |
20 | -- | .50 DIA. |
| 751P | 1.00 | 2.62 x 2.62 | -- | 1.00 |
60 | -- | NO |
| 752P | 1.00 | 2.62 x 2.62 | -- | 1.00 | 60 | -- | 1.00 DIA. |
| 1202P | 2.00 | 3.12 x 3.12 | -- | .91 |
30 | -- | NO |
| 1204P | 2.00 | 3.12 x 3.12 | -- | .91 |
30 | -- | 1.00 DIA. |
| 2205P | 3.00 | 4.12 x 4.12 | -- | .91 |
30 | -- | NO |
| 2206P | 3.00 | 4.12 x 4.12 | -- | .91 |
30 | -- | 1.50 DIA. |
| 3205P | 4.00 | 5.12 x 5.12 | -- | .91 |
30 | -- | NO |
| 3206P | 4.00 | 5.12 x 5.12 | -- | .91 |
30 | -- | 2.00 DIA. |
| Isotech,
Inc. 777 Schwab Road, Suite T Hatfield, PA 19440 |
|