| High
Precision Crossed Roller Linear Slide (Low Profile) - Specifications |
 
|
| Specifications: | |
| Straight line accuracy | 0.000040"/" of travel |
| Repeatability | 0.000020" |
| Coefficient of friction | 0.002 |
| Construction |
Aluminum carriage and base. Hardened stainless steel rollers, shafts, pre-load gibs. Interchangeable with other manufacturers. Carriage and base ground to optical flatness. Bearing way surfaces held to submicron tolerances. Carriage surface flat to 0.0001"/". Crossed Roller design greatly increases load capacity and overhung load capacity. |
| *Minimum Centered Around Mean Position | ||||||||||||||||
|
MODEL |
T R A V E L (in.)* |
LOAD C A P I C I T Y (lbs.) |
W E I G H T (lbs.) |
A | A1 | B | C | D | d | D1 | E | F | G | H | h | l |
| HPRS2-1 | 1.0 | 90 | 0.28 | 2.00 | 2.25 | 1.375 | 1.625 | |||||||||
| HPRS2-1.5 | 1.5 | 115 | 0.38 | 2.75 | 3.00 | .750 | 1.75 | 2.125 | .157 | .244 | 0.875 | 0.40 | 0.87 | 2.250 | .150 | #6-32 |
| HPRS2-2 | 2.0 | 130 | 0.46 | 3.25 | 3.50 | 2.625 | 2.750 | |||||||||
| HPRS2-3 | 3.0 | 140 | 0.56 | 4.00 | 4.25 | 3.375 | 3.500 | |||||||||
|
|
||||||||||||||||
| HPRS3-1 | 1.0 | 220 | 0.66 | 2.62 | 2.62 | 2.125 | 2.125 | |||||||||
| HPRS3-2 | 2.0 | 250 | 1.00 | 4.00 | 4.37 | 1.000 | 2.62 | 3.000 | .204 | .328 | 1.250 | 0.62 | 1.50 | 3.375 | .205 | #10-32 |
| HPRS3-3 | 3.0 | 350 | 1.25 | 5.00 | 5.37 | 4.000 | 4.375 | |||||||||
| HPRS3-4 | 4.0 | 390 | 1.50 | 6.00 | 6.37 | 5.000 | 5.375 | |||||||||
| HPRS3-5 | 5.0 | 420 | 2.00 | 8.00 | 8.37 | 7.000 | 7.375 | |||||||||
|
|
||||||||||||||||
| HPRS4-2 | 2.0 | 260 | 2.00 | 4.00 | 4.50 | 2.000 | 2.500 | |||||||||
| HPRS4-3 | 3.0 | 280 | 2.88 | 5.75 | 6.25 | 1.375 | 3.50 | 3.750 | .204 | .328 | 2.000 | 0.62 | 1.98 | 4.250 | .205 | #10-32 |
| HPRS4-5 | 5.0 | 320 | 4.00 | 8.00 | 8.50 | 6.000 | 6.500 | |||||||||
| HPRS4-6.5 | 6.5 | 350 | 5.13 | 10.25 | 10.75 | 8.250 | 8.750 | |||||||||
| HPRS4-9 | 9.0 | 400 | 7.00 | 14.00 | 14.50 | 12.000 | 12.500 | |||||||||
|
|
||||||||||||||||
| HPRS5-5 | 5.0 | 300 | 10.00 | 8.25 | 8.75 | 6.250 | 6.250 | |||||||||
| HPRS5-7 | 7.0 | 360 | 14.52 | 12.00 | 12.50 | 2.000 | 5.75 | 10.000 | .281 | .412 | 4.000 | 0.98 | 3.70 | 10.000 | .280 | 1/4-20 |
| HPRS5-10 | 10.0 | 450 | 18.15 | 15.00 | 15.50 | 13.000 | 13.000 | |||||||||
| Isotech,
Inc. 777 Schwab Road, Suite T Hatfield, PA 19440 |
|