| High
Precision Ball Slide (Low Profile) - Specifications |
 
|
| Specifications: | |
| Straight line accuracy | 0.000040"/" of travel |
| Repeatability | 0.000020" |
| Coefficient of friction | 0.002 |
| Construction | Aluminum carriage and base. Hardened stainless steel balls, shafts, pre-load gibs. Interchangeable with other manufacturers. Carriage and base ground to optical flatness. Bearing way surfaces held to submicron tolerances. Carriage surface flat to 0.0001"/". Ball Slide design offers low rolling resistance and economical price. |
| *Minimum Centered Around Mean Position | ||||||||||||||||
|
MODEL |
T |
LOAD C A P A C I T Y (lbs.) |
W E I G H T (lbs.) |
A | A1 | B | C | D | d | D1 | E | F | G | H | h | l |
| HPM-1 | 0.5 | 8 | 0.06 | 1.00 | 1.25 | 0.625 | 0.750 | |||||||||
| HPM-2 | 1.0 | 15 | 0.11 | 1.75 | 2.00 | .500 | 1.00 | 1.375 | .125 | .198 | CL | 0.24 | 0.40 | 1.500 | .125 | #4-40 |
| HPM-2.5 | 1.5 | 25 | 0.16 | 2.50 | 2.75 | 2.125 | 2.250 | |||||||||
| HPM-3 | 2.0 | 30 | 0.20 | 3.25 | 3.50 | 2.875 | 3.000 | |||||||||
|
|
||||||||||||||||
| HPS2-1 | 1.0 | 25 | 0.28 | 2.00 | 2.25 | 1.375 | 1.625 | |||||||||
| HPS2-1.5 | 1.5 | 31 | 0.38 | 2.75 | 3.00 | .750 | 1.75 | 2.125 | .157 | .244 | 0.875 | 0.40 | 0.87 | 2.250 | .150 | #6-32 |
| HPS2-2 | 2.0 | 42 | 0.46 | 3.25 | 3.50 | 2.625 | 2.750 | |||||||||
| HPS2-3 | 3.0 | 51 | 0.56 | 4.00 | 4.25 | 3.375 | 3.500 | |||||||||
|
|
||||||||||||||||
| HPS3-1 | 1.0 | 72 | 0.66 | 2.62 | 2.62 | 2.125 | 2.125 | |||||||||
| HPS3-2 | 2.0 | 84 | 1.00 | 4.00 | 4.37 | 3.000 | 3.375 | |||||||||
| HPS3-3 | 3.0 | 102 | 1.25 | 5.00 | 5.37 | 1.000 | 2.62 | 4.000 | .204 | .328 | 1.250 | 0.62 | 1.50 | 4.375 | .205 | #10-32 |
| HPS3-4 | 4.0 | 132 | 1.50 | 6.00 | 6.37 | 5.000 | 5.375 | |||||||||
| HPS3-5 | 5.0 | 145 | 2.00 | 8.00 | 8.37 | 7.000 | 7.375 | |||||||||
|
|
||||||||||||||||
| HPS4-2 | 2.0 | 130 | 2.00 | 4.00 | 4.50 | 2.000 | 2.500 | |||||||||
| HPS4-3 | 3.0 | 140 | 2.88 | 5.75 | 6.25 | 3.750 | 4.250 | |||||||||
| HPS4-5 | 5.0 | 160 | 4.00 | 8.00 | 8.50 | 1.375 | 3.50 | 6.000 | .204 | .328 | 2.000 | 0.62 | 1.98 | 6.500 | .205 | #10-32 |
| HPS4-6.5 | 6.5 | 175 | 5.13 | 10.25 | 10.75 | 8.250 | 8.750 | |||||||||
| HPS4-9 | 9.0 | 200 | 7.00 | 14.00 | 14.50 | 12.000 | 12.500 | |||||||||
|
|
||||||||||||||||
| HPS5-5 | 5.0 | 150 | 10.00 | 8.25 | 8.75 | 6.250 | 6.250 | |||||||||
| HPS5-7 | 7.0 | 180 | 14.52 | 12.00 | 12.50 | 2.000 | 5.75 | 10.000 | .281 | .412 | 4.000 | 0.98 | 3.70 | 10.000 | .280 | 1/4-20 |
| HPS5-10 | 10.0 | 225 | 18.15 | 15.00 | 15.50 | 13.000 | 13.000 | |||||||||
| Isotech,
Inc. 777 Schwab Road, Suite T Hatfield, PA 19440 |
|